SaniCart Patent pending

A sealed, rolling wash bay for your drain machine.

SaniCart lets hospital facilities teams roll a drum-type drain cleaning machine in without lifting, move it through corridors and elevators with odors and drips sealed inside, then wash it in place and drain the water away.

Rev B CAD model

Turn it, open it, measure it.

Drag to rotate and scroll or pinch to zoom. Raise the ramp to see how it closes the end of the cart for transport.

SaniCart CAD render: an enclosed aluminum cart with clear side panels, a filtration unit inside the top of the handle end, and a diamond-plate loading ramp lowered to the floor at the other end.
Footprint
48 × 30 in
Height
56 in
Handle
42 in
Ramp
About 10°

Renders and model show the Rev B design. Dimensions are nominal and may change before production.

Why hospitals need it

A drain machine shouldn't leave a trail.

After a sewer or drain call, the machine, its drum and its cable are covered in waste. Today it usually rides back on an open cart, past patient rooms and through shared elevators, and gets hosed off wherever there's room.

SaniCart closes that gap. The machine rolls in at the job, rides sealed behind gasketed panels, and gets washed inside the cart's own stainless pan, with the water going down a drain instead of across a floor.

  • Keep odors and drips contained in corridors, elevators and clean areas.
  • No lifting. One technician rolls an 80 to 120 lb machine up the ramp.
  • Wash in place before the machine goes back into storage.
  • Inspect without opening. Clear side panels show what's inside.
  • Doubles as storage between calls, so the machine stays enclosed.

SaniCart contains the work; your facility's cleaning and disinfection procedure still governs it. We're happy to review the cart with your infection prevention team.

Designed features

Everything it takes to move a dirty machine cleanly.

Roll-in ramp that closes the cart

A hinged, non-slip ramp of about 47 in lowers to roughly a 10° slope for loading. Raised, it latches shut and becomes the end wall of the cart.

Gasketed, latched panels

Panels press against a resilient gasket with compression latches, holding tight through bumps and limiting odor and liquid escape.

Clear acrylic sides

See the machine and its cable without opening the cart. Panels remove for cleaning or replacement.

Sloped stainless floor pan

A liquid-tight pan with a raised curb slopes to a closable drain fitting with a hose connection, so wash water goes where your facility allows.

HEPA and carbon filtration

A battery-powered filtration unit mounted above the machine pulls air through HEPA and activated carbon filters to cut odor during transport.

Secured load, easy handling

Tie-down points hold the machine in place. Four 6 in swivel casters with brakes and a 42 in push handle make it easy to steer and park.

How it works

Load, seal, move, wash.

  1. 01

    Roll in

    Lower the ramp, lock the casters and roll the drain machine onto the floor pan. Strap it down.

  2. 02

    Seal

    Raise and latch the ramp, close the drain and switch on the filtration unit.

  3. 03

    Move

    Push the cart through corridors and elevators to the job, storage or wash area.

  4. 04

    Wash

    Open a panel, wash the machine, cable and interior, and drain the water to a floor drain or container.

Specifications

Rev B at a glance

Overall size48 in long × 30 in wide × 56 in tall
FrameAluminum square tube, 49 in tall on a 7 in base (6 in casters + 1 in base frame)
Interior clear heightAbout 46 in above the floor pan
Floor panStainless steel, sloped to a closable drain, raised curb, about 8 in off the floor
Loading rampAbout 47 in long, non-slip, about 10° when lowered; closes the end when raised
PanelsClear acrylic sides and roof, brushed aluminum handle end, gasketed with compression latches
AirHEPA and activated carbon filtration unit, battery powered
CastersFour 6 in heavy-duty swivel casters with brakes
Push handle1 in tube, grip centerline at 42 in
FitsDrum-type drain cleaning machines up to about 43 in tall, such as the RIDGID K-750 size class
OptionsGFCI outlet with sealed cord entry, hose connection with interior spray bar, removable grate

Specifications reflect the Rev B design and may change before production. Load ratings are confirmed during final engineering. RIDGID and K-750 are trademarks of their respective owner; SaniCart is not affiliated with or endorsed by RIDGID.

Patent pending

Original design, protected.

SaniCart is patent pending in the United States. The roll-in ramp that closes the cart, the sealed wash-in-place floor pan and the onboard air filtration were designed together as one system for moving contaminated drain cleaning equipment.

Will it fit our drain machine?

SaniCart is sized for drum-type machines up to about 43 in tall, like the K-750 class. Tell us your make and model and we'll confirm the fit. Larger or smaller versions for sectional machines, jetters or camera reels can be discussed.

Will it fit through our doors and elevators?

The cart is 30 in wide and 48 in long, so it clears standard hospital doors and service elevators. Tell us your narrowest opening and we'll check it.

Where does the wash water go?

Out the drain fitting at the low point of the pan. It takes a hose to a floor drain, a sanitary sewer connection or a collection container, following your facility's rules.

Does it need power?

No. The filtration unit runs on a rechargeable battery. A GFCI outlet for charging, lights or accessories is available as an option.

What does it cost, and when can we get one?

Pricing depends on quantity and options, so we quote each order. We're taking requests now for the first production run.

We only use your details to respond to your request. See our privacy policy.